|
|
SAFE ZONE, BLEEDING, DIE LINE
Example :
Input the artwork actual size at Ordering Page when you place order. Let’s say your artwork = 98mm x 92mm
|
IMPORTANT NOTES FOR WASTE REMOVAL FINISHING
PREPARING FILE FOR LABEL STICKER WITH DIE LINE ARTWORK SPECIFICATION
DIE LINE PRECAUTIONS
Cutting Edge Tolerance: + -1mm
Below are mis-registration scenario that can be happen during the die-cut process when die lines is not correctly placed, as + -1mm cutting edge tolerance has to be taken into consideration.
Below are mis-registration scenario that can be happen during the die-cut process when die lines is not correctly placed, as + -1mm cutting edge tolerance has to be taken into consideration.
- Scenario 1 :
What happens when die line falls exactly on the artwork line.
Scenario 2 :
What happens when die line is exactly on different colour background
What happens when die line is exactly on different colour background
- Member is advised to revise artwork when these problem are detected.
- Excard shall not be held liable for any of defect in printing outcome due to artwork sent not correctly prepared as advised.
GAP BETWEEN MULTI-EDGES DIE LINE
How to define “Multi-Edges Die Line” - More than 5 cutting edges within 10mm.
WHITE COLOR PRINTING
White color is only available for OPP and not available for other stickers. Printed stickers will show white color due to sticker surface color are white (MKPS, PRPS, PPNG and SYPR).
Yet for Transparent OPP sticker , since it is transparent, so printing without white ink will be see through if paste on colored surface.
Yet for Transparent OPP sticker , since it is transparent, so printing without white ink will be see through if paste on colored surface.
ARTWORK PREPARATION FOR OPP WITH WHITE INK
For order with 4C + White
Page 1: Overview artwork (Printable artwork and Dieline)
Page 2: White artwork with Process Black Colour (K100) - rename to “White”
Page 3: Printable artwork only (CMYK)
Page 4: Dieline only
For order with White (1C)
Page 1: Overview artwork (White artwork and Dieline)
Page 2: White artwork with Process Black Colour (K100) - rename to “White”
Page 3: Dieline only
Finishing Cut To Size
Page 1: White artwork with Process Black Colour (K100) - rename to “White”
Page 2: Printing artwork
